UMK450T

UMK450T
Brush Cutter Specifications
EngineGX50
Power2hp @ 7000rpm
Pipe Diameter28mm
Pipe Length1500mm
Number of Brushes7
Drive Shaft Diameter8mm
Drive Shaft Length1545mm
ShapeU-handle
Throttle LeverTrigger 2 Motion
Type of MechanismAdjustable
3 Blade (size)10″/25.4
Nylon Head Diameter3mm
Type of BeltDouble
Noise Level99.0db/99.7db
Handle Vibration (Left/Right)55.1/55.6
Frame Weight4.12kg
Frame Weight with Heavier Blade4.49kg
Overall Dimensions
Length1905mm
Width640mm
Height470mm
Weight Dry8.4kg
Weight Wet9.3kg
Engine Specifications
Engine TypeAir Cooled 4-stroke Single-Cylinder OHC Gasoline Engine
Bore x Stroke43mm x 33m
Displacement47.9cm3
Compression Ratio8.0:1
Net Power1.47kW (2hp) / 7000rpm
Max. Net Torque2.2Nm / 0.22kgfm / 5000rpm
Ignition SystemTransistorised
Starting SystemRecoil Starter
Fuel Tank Capacity0.63 litres
Fuel Cons. at Net Power0.97 litres/hr @ 7000rpm
LubricationOil Mist
Engine Oil Capacity0.13 litres
Dimensions (L x W x H)199mm x 260mm x 263mm
Dry Weight4.13kg

DISCLAIMER

Whilst Protech Industrial Equipment Ltd and its affiliates takes reasonable care to ensure the accuracy and completeness of any data or information provided by it on this web site, any person accessing this web site agrees that by so accessing this web site that Protech Industrial Equipment Ltd, its officers, employees and agents do not accept any liability of whatsoever nature for any direct, indirect, incidental or consequential loss or damage of any kind or nature, howsoever arisingĀ from the use of or reliance on any such data or information.
Need Help?
Start a Conversation
Chat with us on WhatsApp
We usually reply in a few minutes